Otasuke Pro! > Samples > Cockpit Parts > PLC / Machine Controller Connection Sample

PLC / Machine Controller Connection Sample

With this sample, you can get the detailed information of PLC or the Machine Controller by using the driver which is improved and newly developed for GP3000 Series.

It is useful for tracing problems on the look-alike parts screen and the alarm confirmation screen.

Supported Model	Look-Alike Parts Module
Yokogawa Electric Corporation: FA-M3	CPU	SP67-6S	Controller/PID Unit	CU04-1N
	Input Unit	XD32-3F	Positioning Unit	NC32-0N
	Output Unit	YD32-1P
Yaskawa Electric Corporation: MP2300	CPU	MP2300
Yaskawa Electric Corporation: MP2300	Input Unit	LIO-01	Output Unit	218IF-01

Feature
	For FA-M3 by Yokogawa Electric Corporation
	*	You can get the inside information of FA-M3 easily only by changing the addresses on the module insert position.
	*	You can get system logs of FA-M3.
	*	This sample supports the module-typed controller and the positioning unit. You can set or check even without a dedicated monitor.
	*	You can set the parameter of the controller on the touch panel.
	*	You can check alarm information of the controller on the touch panel.
	*	You can check information of the positioning unit on the touch panel.
	*	GP-Pro EX Ver. 1.10 or higher is required. ( In addition, YOKOGAWA Electric Corporation PC Link Ethernet Driver needs to be updated.)

	For MP2300 by Yaskawa Electric Corporation
	*	You can get the inside information of MP2300 easily only by changing the address settings of the module (I/O, motion).
	*	You can refer to S registers and O registers.
	*	You can refer to motion-typed registers (IW8000 ~, OW8000 ~).
	*	Bit of M registers can access to full address (MB00000 ~ MB4095F → MB00000 ~ MB65536F)
	*	GP-Pro EX Ver. 2.00 or higher is required.

* GP3000 Series support this functionality.

Download the sample program and the detailed description (PDF file).

↑Back to page top