Screen Sample File Collection

EZ Tower Light Connection

You can set up the operation of EZ Tower Light (such as color of lighting, blinking speed, buzzer) on HMI.

Supported Model
Digital Electronics Corporation USB Connection Type Monolithic EZ Tower Light
  1. Display control of EZ Tower Light
    Depending on the setting, lighting color, blink rate, and buzzer of EZ Tower Light are controlled. (Chosen from the three selective operations below*)
  • Direct mode: Lighting color, speed, and buzzer can be directly controlled by inputting word data from PLC.
  • Normal mode: Based on the setting on SP/GP/LT (Lighting color, speed and buzzer), lamp and buzzer will respond to input bit data from PLC.
  • Combination mode: Based on the pattern setting on SP/GP/LT (Lighting color, speed and buzzer), the combination of lamp and buzzer will respond to between 0 to 16 numeric inputs from PLC.
* Direct mode, normal mode, and combination mode cannot be used in conjunction with a single project file.
  2. Setting screen
    EZ tower lights operation setting (flashing lights color, speed, and buzzer). Save the setting data onto USB memory or SD card and reuse it.
  3. Monitor screen
    Display the current status of lighting on the screen.

* GP-Pro EX Ver. 3.12.000 or later is required. For SP5000 Series, GP-Pro EX Ver. 4.00.000 or later is required. For GP4100 Series Color Model, GP-Pro EX Ver. 4.05.000 or later is required.
* SP5000 Series, GP-4501T/GP-4301T, GP4100 Series Color Model support the connection device sample.

We do not guarantee that the operation of this sample will be uninterrupted or error-free.

Download the sample program file and detailed description (PDF file).

Download this sample application!