FAQ
Can I show and hide line charts (channels) that are displayed on the Historical Trend Graph?

You can show/hide the line chart for each channel. It is useful when you want to isolate or compare specific lines on a multiple line graph.

You can show and hide a channel of the line chart alternately by the specified bit address turning on and off.



Setup Instructions

1. Set [Sampling].
 
2. Place a Historical Trend Graph part and make the following settings to enable each channel's Show/Hide feature.
 
On the [Display Area] tab in the Historical Trend Graph window, set the [Channel Number] and the [Display Condition].
Display Condition
Always Display Always displays the graph.
Display When Bit OFF Displays the graph when [Display ON/OFF Address] is off and hides the graph when [Display ON/OFF Address] is on.
Display When Bit ON Displays the graph when [Display ON/OFF Address] is on and hides the graph when [Display ON/OFF Address] is off.
 
NOTE
To use this feature, your screen editor must be GP-Pro EX Ver. 2.20 or above.


Contact Us | Tech Support | Customer Care | Repairs | Privacy Policy | Terms of Use | Prop 65
Copyright (c) 1996-2019 Schneider Electric Japan Holdings Ltd. All Rights Reserved.