FAQ

 An error code is displayed on the screen.


Error codes displayed on the display are introduced below.

Major Cause
Error Code
Description and Solution
When communication with the connected device fails RHxx + 3 digit number [1.6.2 Display-related errors Errors displayed when communication fails]
Maintenance/Troubleshooting Guide P1-116
During runtime processing RAAA + 3digit number [1.6.2 Display-related errors Errors starting with RAAA (Application errors)]
Maintenance/Troubleshooting Guide P1-125
At startup of runtime of the WinGP function RAAE + 3 digit number [1.6.2 Display-related errors Errors starting with RAAE]
Maintenance/Troubleshooting Guide P1-133
During communication setting of a runtime program REAA + 3 digit number [1.6.2 Display-related errors Errors starting with REAA]
Maintenance/Troubleshooting Guide P1-134
GP is being started Start up Error: Message [1.6.2 Display-related errors Other errors (System errors)]
Maintenance/Troubleshooting Guide P1-135
At startup of WinGP Message [1.6.2 Display-related errors At startup of WinGP]
Maintenance/Troubleshooting Guide P1-137
Device connected to the DIO board interface is not operating properly RGE* + 3 digit number [1.6.2 Display-related errors I/O driver errors]
Maintenance/Troubleshooting Guide P1-138
During a logic program is running RGAA001 [1.6.2 Display-related errors Runtime error]
Maintenance/Troubleshooting Guide P1-139
In the case where device that connects to an interface of an internal or external driver fails to operate properly when using LT3000 Series 3 digit number + message [1.6.2 Display-related errors I/O driver errors]
Maintenance/Troubleshooting Guide P1-140


Contact Us | Tech Support | Customer Care | Repairs | Privacy Policy | Terms of Use | Prop 65
Copyright (c) 1996-2019 Schneider Electric Japan Holdings Ltd. All Rights Reserved.