-
You cannot transfer using modem or COM port.
-
During the initialization process after start up
, WinGP displays a screen asking for a retransfer request if any
error (damage or loss) is found in the necessary file.
-
If you transfer the project file to a different
type of IPC, an error dialog box is displayed indicating that the
model differs and the transfer cannot be completed. to transfer the
file to a different model, convert the model using the editor
before transfer.
-
You need to exit WinGP because [ProjectCopy](Copy
Tool) updates the files used in WinGP. If you try to use the copy
operation while WinGP is operating, an error message is displayed
and the copy operation is not executed.
-
When OS is Windows XP Embedded, you can set the
Write Filter in a driver (C drive) of the system using IPC tool.
WinGP is installed in C drive and the Write Filter is enabled,
WinGP system files or screen data cannot be updated. Disable the
Write Filter before starting transfer.
-
WinGP allows for changing the port number with
the transfer tool. You cannot LAN transfer from the transfer tool
if you forget the new port number.
