|
Error Code
|
Error Message
|
Cause and Troubleshooting
|
|
0xC0B00201
SAAF001
-1062206975
3232760321
|
Cannot
initialize TCP/IP.
|
From the Windows [Control Panel]-[Network
Connection] please confirm that connection setting is enabled and
that the TCP/IP protocol has been installed, which can be confirmed
in the property of the connection setting. 'WinGP SDK' does not
work without TCP/IP.
|
|
0xC0B00203
SAAF003
-1062206973
3232760323
|
This PC
does not have a valid IP address allocated. Please check the TCP/IP environment of
this PC.
|
Please confirm that the LAN card works
properly.
Please check the LAN cable, too.
|
|
0xC0B00204
SAAF004
-1062206972
3232760324
|
Cannot
load the PLCInfo.xml file.
|
Please update the protocol driver. If it does
not solve the problem, please install 'WinGP SDK' again.
|
|
0xC0B00205
SAAF005
-1062206971
3232760325
|
Cannot
load the Editor Driver.
|
|
0xC0B00206
SAAF006
-1062206970
3232760326
|
An error
occurred on the Active-X I/F.
|
Please confirm that the OS version is
appropriate.
If the phenomenon still reoccurs despite the
restart, please install 'WinGP SDK' again.
|
|
0xC0B00207
SAAF007
-1062206969
3232760327
|
Cannot
execute because of the version inconsistency of DLL and EXE for
Pro-Server EX.This
program will be shut down.
(xx:
program name)
|
Please confirm that there are not multiple
different versions of 'Pro-Server EX' or DLLs of 'WinGP SDK' are
installed in one PC. Only 1 version of 'Pro-Server EX' or 'WinGP
SDK' can be installed in a PC.
|
|
0xC0B00209
SAAF009
-1062206967
3232760329
|
The file
Core.ID was not found.
|
Please restart your PC. If it does not solve
the problem, please install 'WinGP SDK' again.
|
|
0xC0B0020B
SAAF011
-1062206965
3232760331
|
ProNet.dll
has not been installed properly.
|
|
0xC0B0020C
SAAF012
-1062206964
3232760332
|
Cannot
start Pro-Server EX. Please close all the applications that use
Pro-Studio EX or Pro-Server EX, and try again.
|
Cannot start 'WinGP SDK' because 'WinGP SDK' or
an application using 'WinGP SDK' may not have stopped normally.
Please close 'WinGP SDK' and all the applications running on it,
and then try again.
|
|
0xC0B00211
SAAF017
-1062206959
3232760337
|
This API
is not supported.
|
The API you use is unavailable. Please consider
another method.
|
|
0xC0B00212
SAAF018
-1062206958
3232760338
|
The
specified string is invalid as a device address.
|
Please reconfirm the address specification
method.
Please confirm that no change has been made to
devices and nodes.
Please confirm that the necessary device driver
has been installed.
|
|
0xC0B00213
SAAF019
-1062206957
3232760339
|
The
specified device supports bit access only.
|
Please confirm the device to access and the
access method.
|
|
0xC0B00214
SAAF020
-1062206956
3232760340
|
The
specified device driver is not supported (The necessary device
driver has not been installed).
|
Please install according to Device/PLC
differences.
|
|
0xC0B00215
SAAF021
-1062206955
3232760341
|
The
parameter value is invalid.
|
Please review the API parameters.
|
|
0xC0B00216
SAAF022
-1062206954
3232760342
|
The device
no. is out of range.
|
Please check the device number.
|
|
0xC0B00217
SAAF023
-1062206953
3232760343
|
The
specified device does not exist.
|
Please check that the Device/PLC settings or
System Area Start Address settings are correct.
|
|
0xC0B00218
SAAF024
-1062206952
3232760344
|
The
specified group symbol does not exist.
|
Please check the group symbol
specification.
|
|
0xC0B0021A
SAAF026
-1062206950
3232760346
|
In Queuing
Access, read-access and write-access, or cache access and direct
access, cannot be mixed.
|
Please confirm that no different access method
exists between the start of queuing and the actual access.
If there is the necessity of using a different
access method, please use another queuing access.
|
|
0xC0B0021D
SAAF029
-1062206947
3232760349
|
The
specified node has not been registered in the network
project.
|
Please check the node specification.
|
|
0xC0B0021F
SAAF031
-1062206945
3232760351
|
The API
was double called. The
specified access handle for Pro-Server EX is already
running.
|
Consider using EasySetWaitType() to avoid
calling the API simultaneously.
|
|
0xC0B00220
SAAF032
-1062206944
3232760352
|
In
data-type conversion, the data type of the conversion
source/destination is unsupported.
|
Please check the contents of the Variant
type.
|
|
0xC0B00221
SAAF033
-1062206943
3232760353
|
Backup
data type specified is not supported.
|
Please check the data type specification.
|
|
0xC0B00222
SAAF034
-1062206942
3232760354
|
Failed to
open the SRAM backup data file or to create its copy in the
PC.
|
Please check the specifications of the
destination file/folder in the PC, disk space, and the access
rights to the file, etc.
|
|
0xC0B00223
SAAF035
-1062206941
3232760355
|
In
Read/Write Backup Data, failed to access the file.
|
In reading or writing SRAM Backup Data, an
error occurred in accessing the specified file. Please check the
free space of the PC and the file access right, and then execute it
again.
|
|
0xC0B00224
SAAF036
-1062206940
3232760356
|
In Write
SRAM Backup Data, the specified file size is too large.
It must be 96 KB or
less.
|
Please confirm that the file specified in Write
SRAM Backup Data is correct. Also, please specify a file of the
size of 96Kbytes or less.
|
|
0xC0B00225
SAAF037
-1062206939
3232760357
|
Numeric
value error. Please set a correct value.
|
Please confirm that the string is valid as a
numeric value.
|
|
0xC0B00226
SAAF038
-1062206938
3232760358
|
The
specified data count is 0 or out of range.
|
Please check the data count.
|
|
0xC0B00227
SAAF039
-1062206937
3232760359
|
The max
number of access destinations is too high (It must be 1500 or
less).
|
Please consider dividing it for successful
access.
|
|
0xC0B00228
SAAF040
-1062206936
3232760360
|
The total
buffer size of the data to access is too high. (It must be 1MB or
less.)
|
|
0xC0B00230
SAAF048
-1062206928
3232760368
|
Cannot
start Pro-Server EX.
|
Please restart your PC. If it does not solve
the problem, please install 'WinGP SDK' again.
|
|
0xC0B00238
SAAF056
-1062206920
3232760376
|
Reading
out logging data from a GP3000 Series / WinGP NODE is not
allowed.
|
Please change the setting to not execute Read
Logging Data when the target is a 'WinGP' Node.
|
|
0xC0B00239
SAAF057
-1062206919
3232760377
|
Reading
out trend data from a GP3000 Series / WinGP NODE is not
allowed.
|
Please change the setting to not execute Read
Trend Data when the target is a 'WinGP' Node.
|
|
0xC0B00240
SAAF064
-1062206912
3232760384
|
The
specified access handle for Pro-Server EX is invalid.
|
Please restart your PC. It must be other than
0, correctly created, and not discarded.
|
|
0xC0B00241
SAAF065
-1062206911
3232760385
|
Cannot
continue because this command is unsupported.
|
Please restart your PC. If it does not solve
the problem, please install 'WinGP SDK' again.
|
|
0xC0B00242
SAAF066
-1062206910
3232760386
|
Cannot
process because Pro-Server EX stopped.
|
Please exit all applications before you close
'WinGP SDK'.
|
|
0xC0B00243
SAAF067
-1062206909
3232760387
|
While
waiting for a processing result from the server, the API received
the application quitting message.
|
If you do not want to receive WM_QUIT, please
use a multihandle system API in EasySetWaitTypeM(2).
|
|
0xC0B00244
SAAF068
-1062206908
3232760388
|
The file
name consists of more than 256 characters. Supposed to be within 256
characters.
|
Please check the file name specification.
|
|
0xC0B00245
SAAF069
-1062206907
3232760389
|
Queuing
access registration has not started.
|
Please check the sequence of the program.
|
|
0xC0B00246
SAAF070
-1062206906
3232760390
|
Actual
queuing access has not been made.
|
|
0xC0B00247
SAAF071
-1062206905
3232760391
|
The device
access to the specified number failed.
|
Please check the cable or device operating
environment.
|
|
0xC0B00248
SAAF072
-1062206904
3232760392
|
The device
access with the specified number has not been registered.
Please check the preregistered
access count and no.
|
Please check the sequence of the program.
|
|
0xC0B0024C
SAAF076
-1062206900
3232760396
|
The
specified group number is not within the range of sampling data
group number.
|
Please review the API parameters.
|
|
0xC0B0024D
SAAF077
-1062206899
3232760397
|
In Queuing
Access, Read and Write cannot be mixed.
|
Please check the sequence of the program.
|
|
0xC0B00250
SAAF080
-1062206896
3232760400
|
No word
exists.
|
Please review the API parameters.
|
|
0xC0B00251
SAAF081
-1062206895
3232760401
|
Invalid
name/word. Illegal
characters are included.
|
|
0xC0B00252
SAAF082
-1062206894
3232760402
|
The
specified node has not been registered in the network
project.
|
Please review the API parameters.
|
|
0xC0B00253
SAAF083
-1062206893
3232760403
|
The
specified device has not been registered.
|
|
0xC0B00254
SAAF084
-1062206892
3232760404
|
Array
Index Specification Error.
|
Please check the array specification
method.
|
|
0xC0B00255
SAAF085
-1062206891
3232760405
|
The
specified device is an undefined symbol or an invalid
address.
|
Please check the device address specification
method.
|
|
0xC0B00256
SAAF086
-1062206890
3232760406
|
The symbol
name is invalid, or the group specification is too deeply
nested.
|
|
0xC0B00257
SAAF087
-1062206889
3232760407
|
Index
specification is unavailable for a string-type symbol.
|
|
0xC0B00258
SAAF088
-1062206888
3232760408
|
The
specified index value is too high.
|
|
0xC0B00259
SAAF089
-1062206887
3232760409
|
Group
symbol specification is unavailable for this device
specification.
|
|
0xC0B0025A
SAAF090
-1062206886
3232760410
|
Please
specify a group symbol to specify a device.
|
|
0xC0B0025B
SAAF091
-1062206885
3232760411
|
The symbol
sheet name is invalid, or it is unavailable for the specified
device.
|
Please check the device address specification
method.
|
|
0xC0B0025C
SAAF092
-1062206884
3232760412
|
Device
names are redundantly specified.
|
A fatal error occurred.
Restart 'WinGP' and 'WinGP SDK' after executing
a forced transfer in 'GP-Pro EX'.
|
|
0xC0B0025D
SAAF093
-1062206883
3232760413
|
Cannot use
the specified symbol because its data type is different from the
one required here.
|
The symbol data type and the specified data
type are different and cannot be used. Check the Symbol name or
data type.
|
|
0xC0B0025E
SAAF094
-1062206882
3232760414
|
Failed to
analyze the option-specifying string.
|
Please review the API parameters.
|
|
0xC0B00262
SAAF098
-1062206878
3232760418
|
Failed to
read the file.
|
Please confirm that the specified file exists
in the CF Card folder. If exists, please confirm the right of
access to the file.
|
|
0xC0B00263
SAAF099
-1062206877
3232760419
|
Failed to
writing to the file.
|
Please check the access rights to the write
destination. If there is no problem with the access right, please
check whether the CF Card has enough free space.
|
|
0xC0B00264
SAAF100
-1062206876
3232760420
|
The
specified file was not found.
|
Please confirm that the specified file
exists.
|
|
0xC0B00265
SAAF101
-1062206875
3232760421
|
Failed to
delete the file.
|
Please confirm that the specified file exists
in the CF Card folder. If exists, please confirm the right of
access to the file.
|
|
0xC0B00266
SAAF102
-1062206874
3232760422
|
Failed to
rename the file.
|
Please confirm that the specified file exists
in the CF Card folder. If it does, please check the access right to
the file and whether the new file name does not contain any
forbidden characters.
|
|
0xC0B00267
SAAF103
-1062206873
3232760423
|
Cannot
open the file list retention file.
|
Please check the access rights to the
destination folder. If there is no problem with the access right,
please check whether the drive has enough free space.
|
|
0xC0B00269
SAAF105
-1062206871
3232760425
|
No file
name has been inputted.
|
Please input a file name.
|
|
0xC0B0026A
SAAF106
-1062206870
3232760426
|
Too long
file path.
|
Please shorten the file path.
|
|
0xC0B0026C
SAAF108
-1062206868
3232760428
|
Connection
to GP3000 Series NODE was reset.
|
After confirming the GP3000 Series NODE/'WinGP'
Node is still on and the cable is properly connected, please
execute it again
|
|
0xC0B0026D
SAAF109
-1062206867
3232760429
|
The
destination NODE does not respond.
|
|
0xC0B0026E
SAAF110
-1062206866
3232760430
|
Could not
complete the operation because connection was broken during the
process.
|
|
0xC0B0026F
SAAF111
-1062206865
3232760431
|
Cannot
connect to the specified node because it does not exist.
|
Please use the #WinGP node name.
|
|
0xC0B00272
SAAF114
-1062206862
3232760434
|
The
parameter value is invalid.
|
Please review the inputted parameter, and set a
correct value.
|
|
0xC0B00273
SAAF115
-1062206861
3232760435
|
Failed to
acquire CF Card's File List
|
Please confirm that the specified file type is
correct. Also, please check the access right to the destination
folder. If there is no problem with the access right, please check
whether the drive has enough free space.
|
|
0xC0B00274
SAAF116
-1062206860
3232760448
|
Could not
connect to GP3000 Series NODE / WinGP NODE.
|
'WinGP' NODE may be busy. Please execute it
again after a brief interval.
Or, if the connection with 'WinGP' NODE is
established using the transfer tool, please exit the tool and then
execute it again.
|
|
0xC0B002A6
SAAF166
-1062206810
3232760486
|
Read SRAM
Backup Data is now being used.
|
Please execute Read SRAM Backup Data again.
|
|
0xC0B002A7
SAAF167
-1062206809
3232760487
|
Parameter
Error in Read SRAM Backup Data
|
Please execute Read SRAM Backup Data using a
correct parameter.
|
|
0xC0B002A8
SAAF168
-1062206808
3232760488
|
Failed to
write to a saved file.
|
If the hard-disk capacity of the PC is
insufficient, please increase it and execute the operation again.
Or please restart the PC and execute again.
|
