Create a switch to exit WinGP.
Please refer to the Settings Guide for details. 10.15 Switch/Lamp Parts Settings Guide
For details on how to draw parts, and defining the address, shape, color, and labels, please see the parts editing topic. 8.7.1 Editing Parts
From the [Parts (P)] menu, point to [Switch/Lamp (C)] and select [Special Switch (P)], or click , and place the Switch on the screen.
Double-click the placed Switch part. The following dialog box appears.
In [Select Shape], select the Switch shape.
Some switch shapes do not allow you to change the color.
In [Special Action], select [Exit WinGP].
If you select the [Confirm] check box, the following message appears when you touch the switch on the WinGP.
, and place the Switch
on the screen.
