Since the display unit and IPC or PC/AT
compatible machines are different pieces of hardware, the available
features are different. For features available in WinGP, see the
following. 38.1.4 Differences with Display Unit -
WinGP
In the System Settings window, select [Display
Unit] and click the [IPC Settings] tab. Select the [Display
Right-Click Menu] check box. When selected, the right-click menu
enables you to change screens or go to Offline mode.
From [Window Mode], select [Window Screens].
As required, in the [Window Settings], define the
window display position and show or hide the window titlebar.
When using the backup SRAM to store alarms,
sampling data, or recipe files, in the [Historical Data Retentive
Settings] area's [Historical Data Storage Location] field, type the
folder path that will be used to emulate the SRAM backup
function.
If you do not input a path, it is saved to the
following WinGP installation folder, "NAND\PRJ001\USER\SCREEN".
When setting up destination folders in the
[Destination Folder] area, in the [CF Card Folder] or [USB Storage
Destination Folder] fields, type the path where data will be
output, relative to the Screen Transfer destination. WinGP
references the data (such as Recipes) in the folder defined
here.
If you do not input a path, it is saved to one
of the following WinGP installation folders: "CFA00" or
"USBHD".
Define a Destination Folder that is different
from the [CF Card Folder] or [USB Storage Destination Folder].
Otherwise, an error will occur.
From the [Project (F)] menu, select [Save as (A)].
Define the location and file name for the project.