-
When you set switch features for both local
function key and the global function key, it will first operate the
local function key and then global function key.
-
When an unsupported Switch feature is set, it
will be ignored.
[F1] key setting
Operation
Press the [F1] key to write data to D0100 and turn ON X0000
(Remote PC Access Window Switch will not be operated because it is
not a target.)
-
When the change screen switch is in the middle of
the set order, the switch action and screen change action are
processed separately, and the order in which the change screen
switch function will occur is undefined.
If you want to have the change screen function occur after all
switches run, place the change screen switch at the end of the set
order.
-
When the function key is set for the called
screen, the function key of the called screen also operates. It
will operate the function key of the call- to screen, and then
function key of the called screen.
-
If the active window was changed to an
application other than WinGP while pressing the function key, it
will be determined that the function key is OFF. If the function
key is still pressed after the WinGP returns to the active window
again, a process will be executed again.
-
When more than two function keys are pressed at
the same time, the switch will work in the pressed order.
-
The action of the shortcut key "activate the menu
bar" for [F10], Windows specification will be enabled in WinGP.
The [F10] key will operate as a function key of WinGP similar to
the other function keys.
-
When you want to activate the menu bar in WinGP,
use the [Alt] key.
-
If you press the function key in offline mode
while the system menu is displayed, it will not function.
Similarly, if you delete the system menu while pressing the
function key, it will not function.
