This item is displayed only when [Forward 1 Frame] is selected in [Configure Switch]. While pressing the switch, specify whether to continuously forward a movie frame by frame.

Backward

This item is displayed only when [Back 1 Frame] is selected in [Configure Switch]. While pressing the switch, specify whether to continuously reverse a movie frame by frame.

Detail Action

This item is displayed only when [Change Movie] is selected in [Configure Switch]. Select the operation for switching movies.

Next
Previous
Specify Range

Loop

This item is displayed only when [Change Movie] is selected in [Configure Switch], and [Next] or [Previous] is selected in [Details]. Specify whether to perform a loop operation.

Index Number

This item is displayed only when [Change Movie] is selected in [Configure Switch], and [Play List] is specified in [Details]. Specify the Index Number of the movie file to be played. The setting range is from 0 to 99.

Action Mode

This item is displayed only when [Zoom] is selected in [Configure Switch]. Select how to specify the display size from either [Direct] or [Indirect].

Direct

Select the display size from [Standard], [1/4], [1/16], or [Zoom]. For [Zoom], every time the switch is pressed, the movie is zoomed in the following steps.

Standard -> 1/4 -> 1/16 -> 1/4 -> Standard

When [Loop] is specified, the order is Standard -> 1/4 -> 1/16 -> Standard -> 1/4.

Indirect

Specify the address for storing the display size to indirectly zoom the movie.

The following lists the values to be stored.

0: Standard

1: 1/4

2: 1/16

3 to 0xFFFE: Reserved (does not change)

0xFFFF: Returns to the original screen size.

If a value other than the above is stored, the movie will not zoom.

For a 32-bit device, only the bottom 16 bits are used.

Detail Action

This item is displayed only when [Move] is selected in [Configure Switch].

Direction

Select the direction to move the movie from [Up], [Down], [Left], or [Right]. The following describes the range in which a movie can be moved at one time.

Direction

When playing a movie

When playing a video

Landscape direction

2 dot unit

Portrait direction

Normal size: 2 pixel units

1/4, 1/16 size: 1 dot unit

1 dot unit

Continuous

While pressing the switch, specify whether to continuously move a movie.

Switch Label

Font Type

Select the font type for the label that displays on the switch.

Standard Font

You can specify the vertical and horizontal dimensions of a character in bitmap fonts. When a character is enlarged or reduced, the outline of the character may appear grainy or smudged.

Stroke Font

This is an outline font where the ratio of the character height/width is fixed. Even when a character is enlarged or reduced, the outline clearly displays. However, due to the large required capacity, this font may put a burden on the display unit.

Display Language

Select a language for the label on the switch from [Japanese], [ASCII], [Chinese (Traditional)], [Chinese (Simplified)], [Korean], [Cyrillic], or [Thai].

Text Color

Select a color for the label text.

Label

Enter the text to display on the switch.

Switch color

Border Color

If it exists, select a color for the Part Shape border.

Display Color

Select the Switch color.

Pattern

Select from the 8 patterns or choose [No Pattern].

Blink

Select the Part blink and blink speed. You can choose different blink settings for the [Border Color] and [Display Color].

There are cases where you can or cannot set Blink depending on the Display Unit and [Display] tab's [Display Settings] area.
8.3.1 Setting Colors

Depending on the shape, you may not be able to change the color.
When you select a switch and press the [F2] key, you can directly edit the text on the label.

Converted from CHM to HTML with chm2web Pro 2.85 (unicode)