Record to FTP
Set whether to record from a video camera and save on an FTP
server.
FTP server
Specify the FTP server for saving the movie files. Use the FTP
server number registered in [FTP Server] in the system setting
window.
Direct
Select the FTP server number from 0-31.
Indirect
Specify the address for saving, and specify the connection
number for the server on which the files will be saved. You can
change the FTP server for saving files on the connection
device.
Use a sequence of 3 Words from the specified address.
Turn ON bit 0 to specify the numbers saved in
the following address as the FTP server connection.
Store the server connection number. Store it
before turning ON bit 0 of the [Control] address.
Turning ON bit 0 in the [Control] address
also turns ON bit 0 in the [Status] address. Specifying the server
connection number while saving is in progress results in an error
and bit 15 turns ON.
-
Bit 0 and bit 15 of the [Status] address are
turned OFF when bit 0 of the [Control] address is turned OFF.
-
If a 32-bit device is specified, only the
bottom 16 bits are used.
-
If you copy the value of system variable
#H_LocalName to [User Set String] using D-Script and set [Control]
ON, a folder will be created using the name of the Display unit.
When saving multiple Displays' videos, you can easily determine
which Display's data is in a folder.
File Size
Specify the size of each movie file to be saved. The settings
range is from 1 to 2048 MB. Any pictures that exceed the specified
file size are automatically saved in the next file. The file uses
the name based on the timestamp (year, month, date, hours, minutes,
seconds) when the file is created.
User set string
Specify the character string to be included in the folder and
file names for the saved video files. You can specify up to two
single-byte alphanumeric characters.
-
The file name is the user-defined string
(maximum two characters) + time stamp.
(For example, if the user-defined string is "MC", the date is May
27, 2006, and the time is 15:23:46, then the file name is
"MC060527_152346.SDX".
Direct
Directly input the settings.
Indirect
Specify the address used for saving the file and for specifying
the strings as user set strings. You can change any file name on
the connection device. Use a sequence of 3 Words from the specified
address.
Turn ON bit 0 to save the codes in the
following address as "user set string".
Save the string codes. The procedure for
saving text codes differs depending on the connection devices.
Turning ON bit 0 in the [Control] address
also turns ON bit 0 in the [Status] address. Specifying user set
strings while saving is in progress results in an error and bit 15
turns ON.
-
Bit 0 and bit 15 of the [Status] address are
turned OFF when bit 0 of the [Control] address is turned OFF.
-
If a 32-bit device is specified, only the
bottom 16 bits are used.
Timeout
Specify the queuing time for when the FTP server does not
respond to an access request. The value can be from 10 to 120
seconds.
Control Word Address
Specify the address for controlling save operations. Use a
sequence of 2 Words from the specified address.
Turn ON bit 0 to start recording (start
saving to FTP). Turn OFF the bit to stop recording.
Timing Chart for Saving to
FTP
The FTP save and error status are saved.
Save authorization bits are turned ON when the display unit's power
is turned on.
The error status indicates the following conditions.
Error Code
|
0
|
Completed Successfully
|
—
|
|
1 to 8
|
Reserved
|
—
|
|
9
|
FTP Connection Error
|
The FTP server is not operating normally, or
the FTP server does not exist.
|
|
10
|
FTP Login Error
|
The FTP user name or password is incorrect.
|
|
11
|
Write Error
|
The logged in user does not have writing
privileges, or writing to the FTP server has failed, or there is
not enough free space.
|
|
12 to 13
|
Reserved
|
—
|
|
14
|
Client functions are operating
|
Saving to FTP server was initiated while movie
play was in progress.
|
|
15
|
Reserved
|
—
|
