Record Events
Specify whether to use the [Event Recorder] function for
recording pictures before and after a specific event if the
specified conditions are met.
Trigger
Specify the operational conditions for the event recorder
function.
Bit
Control saving with the specified bit address.
Condition
Bit ON
Start saving with the bit ON.
Bit OFF
Start saving with the bit OFF.
Trigger Bit Address
Specify the control bit address for saving.
Word
Control the saving operation with a value from the specified
word address.
Condition
Match
Saving starts when the value in the settings matches the value
on the PLC.
Specify the value in the settings.
Mismatch
Saving starts when the value in the settings differs from the
value on the PLC.
Specify the value in the settings.
Range
Saving starts when the value in the settings falls in the range
of values on the PLC. The setup values are included.
Set the minimum value from 0 to 65534.
Set the maximum value from 1 to 65535.
Out of range
Saving starts when the setting value is out of the PLC value
range. The setup values are included.
Set the minimum value from 0 to 65534.
Set the maximum value from 1 to 65535.
Word Address
Specify the Word address for controlling saving operations.
Monitor
Set the monitoring conditions.
Always On
The monitoring event recorder is always ON, and the movie player
is unavailable.
Control Word Address
Specify the control address for monitoring operations. Use a
sequence of 2 Words from the specified address.
Trigger save is available only when monitoring.
Turn ON bit 0 to start monitoring. Turn OFF
the bit to stop monitoring.
Event
Recorder Timing Chart
The CF/USB save status and error status are
saved.
Record Time
Specify the time for the record. The value can be from 1 to 60
seconds.
Specify the recording time before the
trigger.
Specify the recording time after the
trigger.
Save in
Set where to save a movie file.
CF
Save the file on CF Card.
User set string
Specify the character string to be included in the folder and
file names for the saved video files. You can specify up to two
single-byte alphanumeric characters.
-
In the "\MOVIE" folder, a folder named with
the specified string is created for the saved files.
-
The file name is the user-defined string (two
characters) + time stamp.
(For example, if the user-defined string is "MC", the date is May
27, 2006, and the time is 15:23:46, then the file name is
"MC060527_152346.SDX".
-
When there is no string set, the folder name is
"\MOVIE\NONAME" and only the time stamp
(year, month, day, hour, minute, and second when the file is saved
on) is used for the file name.
Direct
Specify the string by entering it here.
Indirect
Specify the address used for saving the file and
for specifying the strings as user set strings. You can change any
file name on the connection device. Use a sequence of 3 Words from
the specified address.
Turn ON bit 0 to save the codes in the
following address as "user set string".
Save the string codes. The procedure for
saving text codes differs depending on the connection devices.
Turning ON bit 0 in the [Control] address
also turns ON bit 0 in the [Status] address. Specifying user set
strings while saving is in progress results in an error and bit 15
turns ON.
-
Bit 0 and bit 15 of the [Status] address are
turned OFF when bit 0 of the [Control] address is turned OFF.
-
If a 32-bit device is specified, only the
bottom 16 bits are used.
-
If you copy a value of system variable
#H_LocalName to [User Set String] using D-Script and set [Control]
ON, the folder of Display unit name will be created. When saving
multiple Displays' videos, you can easily determine which Display's
data is in a folder.
USB
Save the file to the USB storage device.
User set string
Specify the character string to be included in the folder and
file names for the saved video files. You can specify up to two
single-byte alphanumeric characters.
-
In the "\MOVIE" folder, a folder named with
the specified string is created for the saved files.
-
The file name is the user-defined string (two
characters) + time stamp.
(For example, when the user-defined string is "MC", the date is May
27, 2006, and the time is 15:23:46
The file name is "MC060527_152346.SDX".
-
When there is no string set, the folder name is
"\MOVIE\NONAME" and only the time stamp
(year, month, day, hour, minute, and second when the file is saved
on) is used for the file name.
Direct
Specify the string by entering it here.
Indirect
Specify the address used for saving the file and
for specifying the strings as user set strings. You can change any
file name on the connection device. Use a sequence of 3 Words from
the specified address.
Turn ON bit 0 to save the codes in the
following address as "user set string".
Save the string codes. The procedure for
saving text codes differs depending on the connection devices.
Turning ON bit 0 in the [Control] address
also turns ON bit 0 in the [Status] address. Specifying user set
strings while saving to the USB storage is in progress will result
in an error and bit 15 will turn ON.
-
Bit 0 and bit 15 of the [Status] address are
turned OFF when bit 0 of the [Control] address is turned OFF.
-
If a 32-bit device is specified, only the
bottom 16 bits are used.
-
If you copy a value of system variable
#H_LocalName to [User Set String] using D-Script and set [Control]
ON, the folder of Display unit name will be created. When saving
multiple Displays' videos, you can easily determine which Display's
data is in a folder.
FTP
Save to the FTP server.
FTP Server
Direct
Select the FTP server number from 0-31.
Indirect
Specify the address for saving, and specify the
connection number for the server on which the files will be saved.
You can change the FTP server for saving files on the connection
device.
Use a sequence of 3 Words from the specified address.
Turn ON bit 0 to specify the numbers saved in
the following address as the FTP server connection.
Store the server connection number. Store it
before turning ON bit 0 of the [Control] address.
Turning ON bit 0 in the [Control] address
also turns ON bit 0 in the [Status] address. Specifying the server
connection number while saving is in progress results in an error
and bit 15 turns ON.
-
Bit 0 and bit 15 of the [Status] address are
turned OFF when bit 0 of the [Control] address is turned OFF.
-
If a 32-bit device is specified, only the
bottom 16 bits are used.
User set string
Specify the character string to be included in the folder and
file names for the saved video files. You can specify up to two
single-byte alphanumeric characters.
-
The file name is the user-defined string
(maximum two characters) + time stamp.
(For example, if the user-defined string is "MC", the date is May
27, 2006, and the time is 15:23:46, then the file name is
"MC060527_152346.SDX".
Direct
Directly input the settings.
Indirect
Specify the address used for saving the file and
for specifying the strings as user set strings. You can change the
file name on the device/PLC. Use a sequence of 3 Words from the
specified address.
Turn ON bit 0 to save the codes in the
following address as "user set string".
Save the string codes. The procedure for
saving text codes differs depending on the connection devices.
Turning ON bit 0 in the [Control] address
also turns ON bit 0 in the [Status] address. Specifying user set
strings while saving is in progress results in an error and bit 15
turns ON.
-
Bit 0 and bit 15 of the [Status] address are
turned OFF when bit 0 of the [Control] address is turned OFF.
-
If a 32-bit device is specified, only the
bottom 16 bits are used.
-
If you copy a value of system variable
#H_LocalName to [User Set String] using D-Script and set [Control]
ON, the folder of Display unit name will be created. When saving
multiple Displays' videos, you can easily determine which Display's
data is in a folder.
Time out
Specify the queuing time for when the FTP server does not
respond to an access request. The value can be from 10 to 120
seconds.
Record Status Address
Specify the address for the event recorder function. Use a
sequence of 2 Words from the specified address.
After a Save Error occurs, turn ON Bit 1 to
restore the error and and enable the save operation.
The event recorder save status and error
status are saved.
Error Code
The error status indicates the following conditions.
|
0
|
Completed Successfully
|
—
|
|
1 to 3
|
Reserved
|
—
|
|
4
|
No CF Card
|
The CF Card/USB storage is not inserted in the
display unit, or the CF Card cover is not closed.
|
|
USB Storage is absent
|
|
5
|
CF Write Error
|
Writing data to the CF Card/USB storage failed
or there is not enough free space.
|
|
USB Write Error
|
|
6
|
Reserved
|
—
|
|
7
|
CF Card Error
|
The CF Card/USB storage device is invalid,
unformatted, or the media inserted is not a CF Card/USB
storage.
|
|
USB storage error
|
|
8
|
Reserved
|
—
|
|
9
|
FTP Connection Error
|
The FTP server is not operating normally, or
the FTP server does not exist.
|
|
10
|
FTP Login Error
|
The FTP user name or password is incorrect.
|
|
11
|
Write Error
|
The logged in user does not have writing
privileges, or writing to the FTP server has failed, or there is
not enough free space.
|
|
12 to 15
|
Reserved
|
—
|
