Video Layout
Select the display operation for the Image Unit window.
Always On
Always displays the Image Unit window.
Window On/Off
Displays/hides the window in [Window Display Bit Address].
Indirect
Use the four consecutive words from the defined [Window Display
Word Address] to control which Image Unit Window number to display
and to show or hide the display.
After storing the display position and the Image Unit Window number
you want to view, turn ON bit 0 in the control address to enable
the display.
-
The following positions are the starting
coordinate when a display unit's orientation is set to
[Portrait]
-
Display units except GP-4100 Series:
Bottom-left of the screen (0,0)
-
GP-4100 Series: Top-right of the screen
(0,0)
-
For more details, please refer to the
following.
3.8.1 Restrictions
for Screen Display
Video Number
Specifies the number of the Image Unit window to display when
the [Video Layout] is set to [Always On] or [Window On/Off]. The
setting range is from 0 to 512.
Window Display Bit Address
When the [Video Layout] is set to [Always ON] or [Window
On/Off], you can specify the video module using thumbnails, or
specify the video window from a list.
Video List
When the [Video Layout] is set to [Always ON] or [Window
On/Off], you can specify the Image Unit Window using thumbnails. Or
you can specify the video window from a list.
Window Interchange
[Move to Top], [No Action], or [Always On Top]. Available when
[Video Layout] is set to [Always On] or [Window On/Off].
Window display word address
When you select [Indirect] under [Video Layout], you can specify
the displayed Image Unit Window number and display position and
control the display/erase of the address.
Data Type
When you select [Indirect] under [Video Layout], you can specify
the data type of value stored in [Window display word address] from
[Bin] or [BCD].
