-
You cannot save another file until one file is
saved successfully. You can save the file onto a CF card or USB
storage and FTP server simultaneously.
-
It is not possible to play a movie while it is
being recorded.
-
When the operation of the event recorder function
is specified as [Always], the play function cannot be used.
-
Record to CF, USB and Record to FTP can be
operated simultaneously while using the event recorder function.
However, the writing speed slows and saving will take longer to
complete.
-
The folder or file name in which a movie is
recorded cannot be changed during recording.
-
If an error occurs during recording, turn ON bit
1 (resume bit) of the specified [Control Address]. The error will
be corrected, and bit 1 (save enable bit) of the status address
will turn ON. Directly turning ON the save enable bit will not
correct the error.
-
When starting to save a movie on the CF Card/USB
Storage, the number of files in the Save to folder is confirmed. If
the predefined number of files have already been saved, it cannot
be saved. However, if [Loop] is set to [Auto], an error does not
occur. The oldest file is deleted and a new file is saved.
-
If the destination folder contains files with any
of the following characteristics, you cannot save to the CF
card/USB Storage.
-
A file with a name in which the number of
characters do not match the specified number.
-
A file with a name in which the first two
characters (User Set String) do not match the specified
characters.
-
A file with an extension other than ".SDX"
-
Do not place a file that was arbitrarily created
under the "MOVIE"
folder on the CF Card/USB Storage. An error may occur during saving
to the CF Card/USB Storage, or the file may be deleted.
-
Up to 32 FTP servers can be registered.
-
The number of movie files to be saved on a FTP
server differs depending on the specifications of the FTP
server.
-
When saving to the FTP server, a write error may
occur due to the load on the FTP server. In that case, save the
file to the CF card or USB storage device.
While the CF card or USB storage is attached to the display unit,
use the following function if you want to move or copy the saved
file to the FTP server.
-
Special Data Display [File Manager]
-
[System Settings] window, [Display Unit]'s
[Remote Viewer] tab, [FTP] settings
-
[Transfer Tool]'s [CF Card Connection] (only
when saving to CF card)
-
If an error is returned from a FTP server, the
saving operation will stop.
-
The server connection number cannot be changed
while a movie is being saved on the FTP server.
-
When switching to offline mode or transfer mode
during recording, the save function stops and the pictures that
have been recorded at that time are saved.
-
While recording, operations of parts or screen
change slow down.
-
It may take several seconds to write data,
depending on the amount.
-
After the Status data is read from the display
unit, be sure to allow time equal to at least one communication
cycle*1 or one Display Scan Time period*2,
whichever is longer, before the next command can be written.
-
You cannot record video while playing a
movie.
-
When [Play List] is specified as [CF], [USB] or
[FTP] in Movie Player, Movie Player will not operate if the movie
playlist file does not exist. If the playlist file was deleted, use
Special Data Display [File Manager] to play the movie.
-
Only SDX format movie files can be played.
-
While you are playing a video file saved on the
FTP server, functions such as pause, fast forward, rewind, slow
motion play, or frame-by-frame forward/reverse play cannot be used
to change the playback speed. If these operational switches are
placed, it will not work.
-
You can change file names but that will not
affect the play order. (Movie files are played in the order in
which they were created on the CF card, USB storage or FTP
server.)
-
While a logic program is running, the video
recording or movie may stop. When using video recording or movie
playing together with logic, input logic wait (LWA) instructions in
the logic program.
-
When using Camera-Viewer EX to display the image
from a video camera connected to the display unit, you cannot use
the Movie Player to play back video. "0011(h)" is stored in bits 8
to 11 in the following address: [Play Control Word Address] +
4.
