With the Video Module installed, pictures taken from four angles
are displayed on the display unit's screen in real time.
-
In [System Settings], select [Image Unit].
-
If the [System Settings] tab is not displayed
in the workspace, on the [View (V)] menu, point to [Workspace (W)],
and then click [System Settings (S)].
-
In the [Image Input Module Settings], confirm
whether [VM Unit 2000] or [VM Unit 3000] is selected.
For [Video Control Start Address] select [Disable]. For [Video
Input] select [NTSC]. (If the video signal is PAL, select
[PAL].)
-
If the [Video Control Start Address] is set to
[Enable], 42 Words from the setup control address are automatically
used to control the video display. For the items in the video
control, see the following.
28.12 Video Control Area
-
On the [Common Settings (R)] menu, select [Image
Unit Window (U)] or click 
to open the following
dialog box. Select [New] and then specify [Number] and [Comment].
(For example, Number "1", Comment "Image Unit Window")
-
The video window [VM1] appears.
-
Adjust the [Image Unit Window] size.
To reduce the Window Screens, first reduce the display area (blue
parts), then drag the 
mark on the four
corners to adjust the size. to enlarge, expand the window size and
adjust the display area to fit the window size.
-
Double-click the blue display area. The following
dialog box appears. In [Video Layout] click 
.
-
In the [Display] area, click 
, and under the
[Channel], select the camera image to be displayed in this upper
left area (for example, Channel 0).
Also select the size of the image (for example, 1/4).
Similarly, select the channels and display sizes for the images
displayed in the upper right, lower left, and lower right
areas.
-
If the selected [Display Size] is larger than
the display unit or the blue display area, the entire image will
not display. You can use [Video Display position] on the [Custom
Settings] tab to specify which part of the input image to be
displayed. If you want to display the entire image, set the
[Display Size] smaller than the size of the blue display area.
-
The display size varies depending on a type of
display unit and display mode.
28.13.1 Display Size - Video
Module
-
Specify the values for the space between the
screens. (For example, Horizontal 10, Vertical 10)
Click [OK] to finish and exit the [Image Unit Window] settings.
-
Click the [Base 1] tab to display the base
screen.
On the [Parts (P)] menu, select [Image Unit Display (V)] or click
to place the [Image
Unit Display] on the screen.
-
Double-click the [Image Unit Display]. The
following dialog box appears.
-
In the [Video Layout] list, click [ON/OFF display]
and select the video screen number (for example, 1) in the [Video
Number].
-
Under [Window Interchange], select [Move to
Top].
-
In the [Window Display Bit Address] list, set the bit address for controlling the window
display and click [OK].
-
Place a switch on the screen to display/delete the
[Image Unit Window].
On the [Parts (P)] menu, point to [Switch Lamp], and select [Bit
Switch (B)], or click 
to place a switch on
the screen.
-
Double-click the switch. The following dialog box
appears.
In the [Bit Address] list, select the (M100) address for
controlling the screen and select [Bit Invert] in the [Bit Action]
list.
icon appears on the
[Image Unit Display]. Click the icon to display the corresponding
video screen. This feature is useful for checking or changing the
video settings.