This section describes how to
operate the Project Converter, which converts Project Files
(*.prw) created with the Pro-face
GP-PRO/PBIII for Windows application into GP-Pro EX Project files
(*.prx).
The software versions you can convert are GP-PRO/PBIII for
Windows versions 1.0 to 7.0.
The following describes compatibility information required for
conversion, and the operation process for the conversion tool,
Project Converter.
For information on compatibility and
restrictions between GP-PRO/PBIII for Windows and GP-Pro EX, refer
to Pro-face Support Site "Otasuke Pro!".
Install the Project Converter on the same
machine as GP-Pro EX. The Project Converter and GP-Pro EX are not
installed at the same time. Each tool must be installed
separately.