To transfer project files with an Ethernet cable, you need to
set the IP address for the PC.
Solution
Set the IP address for the PC.
Setting the IP address for the PC
Click the Start button, select [Settings], and
click [Network and Dial-up Connections].
[Network and Dial-up Connections] opens.
Right-click the [Local Area Connection] icon and select
[Properties] from the displayed context menu.
When [Local Area Connection Properties] appears,
select [Internet Protocol (TCP/IP)] and click the [Properties]
button.
Select [Use the following IP address] and specify
the IP address and subnet mask. (Example: 192.168.0.100,
255.255.255.0) Click the [OK] button to complete the setting.
For details about the IP address setting, ask
your network administrator.
Checking whether the IP address is set
properly for the PC
Execute the IPCONFIG command at the command
prompt.
Click the Start button, select [Programs],
[Accessories], and [Command Prompt].
When [Command Prompt] is selected from
[Accessories], the following screen is displayed.
After "C:\Documents and Settings\(Your computer
name)" is displayed, type "ipconfig" and press Enter.
The result of the command execution is displayed.
Check whether the displayed IP address and subnet mask are the same
as those set for the GP. If they are different, restart the
computer.
