T.2.4.4 Can you get the Display Unit's IP
Address with PING from the command prompt?
Cause
If you cannot receive the IP address, the GP may not be on the
network because the Ethernet cable is not connected or the GP does
not recognize the Ethernet cable's connection port.
Solution
Execute the PING command at the command
prompt
Click the Start button, select [Programs],
[Accessories], and [Command Prompt].
When [Command Prompt] is selected from
[Accessories], the following screen is displayed.
Type ping 192.168.0.1 (IP address of the display
unit) after "C:\Documents and Settings\(Your computer name)" is
displayed on the screen, and press the Enter key.
For details about the IP address setting, ask
your network administrator.
The result of the command execution is displayed.
When a reply from the specified IP address of the GP is received,
check if the port number of the GP is set to 8000. If the IP
address cannot be received, replace the cable or hub.
(Screen when replies from the IP address of the display unit are
received)
(Screen when a reply from the IP address of the display unit is not
received)
Other than the messages above, the following messages could appear.
(The message displayed depends on the connection status.) Ask your
network administrator about settings.
