Displays a list of the specified peripheral devices.
List of Device/PLC Management Addresses
Displays a list of the specified device/PLC management
addresses.
Device/PLC
Displays the specified device/PLC Driver number.
Device
Displays the specified device/PLC names.
Communication Cycle Time
Displays the internal device addresses to store the specified
device/PLC communication cycle time (unit: ms).
The Communication Cycle Time is the time from when the display
unit requests data from the device/PLC, until the display unit
receives the data. The communication cycle times for each
device/PLC when communicating with multiple devices/PLCs are stored
using the address scheme shown here.
-
From the [System Settings] window click
[Display Unit]. Then in the [System Area] tab's [System Area
Device] area, you can specify the communication cycle time, which
is also stored in internal device LS2037 in Bin format. The unit is
10 milliseconds.
-
If LS area is 32 bit, the value is stored in
the lower 16 bits.
SCAN ON/OFF
Displays the internal device address that controls whether to
run or stop the set communication scan for the device/PLC.
Controls the device/PLC using the displayed bit address as the
start.
To stop the communication with the 1st device/PLC of Driver 1,
turn ON the LS9550 bit. to resume, turn OFF the bit.
-
If you select [Enable System Data Area] for the
device/PLC, you cannot turn OFF the communication scan.
-
If LS area is 32 bit, the value is stored in
the lower 16 bits.
Device/PLC1 to 4
Displays the memory size of the font used in the screen area.
The screen area capacity depends on the display model.
1.5 Supported
Features
Manufacturer
Displays the currently specified device/PLC maker.
Series
Displays the series for the currently specified PLC.
Version
Displays the device/PLC series.
Port
Displays the ports that can be connected to a device/PLC.
Printer, Bar code 1, Bar code 2, Script 1,
Script 2
Displays and edits the settings of the specified [Printer], [Bar
Code 1], [Bar Code 2], [Script 1], or [Script 2].
Type
Displays the types of the specified peripheral devices.
Port
Displays the connecting ports of the specified peripheral
devices.