Displays the specified display unit specifications.
Display Unit
Displays the display unit model number.
Series
Displays the series name of a display unit.
Model
Displays the model name that supports the display unit
series.
Orientation
Displays the display unit installation method with [Landscape]
or [Portrait].
Mode
Displays the maximum drawing capacity of the display unit.
Displays when [Model] is set to [AGP-3750T].
For information on the maximum drawing capacity, refer to the
following.
3.7.1.1
New - Display Unit and Model Settings
Specifications
Displays the specifications of the display unit specified in
[Display Unit].
Change Display Unit
The following dialog box appears. Change the display unit model
to be used for the project file.
Current Display
Displays the series name, model name and installation method of
the currently specified display unit.
New Display
Specifies the [Series], [Model], [Orientation], [Revision], and
[Mode] of the display unit that you're changing. If you select [IPC
Series (PC/AT)], select [Screen Size] instead of [Orientation].
Convert
Resolution
When the resolution differs before and after conversion, specify
whether to adjust the resolution automatically. If you convert the
resolution, the part size, position, and the text size are adjusted
automatically according to the display resolution. Some scale
magnification may not convert properly due to text size and
resolution limitations.
