Show Interlocked Condition
When using the Interlock feature, designate whether or not to
configure display settings to show a switch is Interlocked.
When this is designated, the [Interlocked] option will be added
to [Select State] on the [Color] tab and [Label] tab, and you can
set the switch color and label for the Interlock state.
Show In-Delay Status
When using the Delay feature, designate whether or not to
configure display settings to show a switch is In Delay.
When this is designated, the [In Delay] option will be added to
[Select State] on the [Color] tab and [Label] tab, and you can set
the switch color and label for the In Delay state.
Reverse Display
Select whether or not to reverse the color while the Switch is
pressed.
When the [Lamp Feature] is set, this setting cannot be used.
Buzzer
Select whether or not to emit
a buzzer.
One Shot
You can set the buzzer to sound continuously while the Momentary
Switch is or to sound for just a moment. This can only be set when
[Bit Momentary] is selected for [Bit Action].
AUX
Output
Designate whether or not to sound the buzzer from a connected
external device (speaker) when a switch is pressed.
Models that do not have an AUX interface cannot output the
buzzer sound.
