If the Lamp Feature is not used, only [Normal] can be
selected.
If the Lamp Feature is used, set the Switch color corresponding
to the state.
To set a color that is interlocked or in delay,
click the [Switch Common] tab's [Extended], then select the [Show
Interlocked Condition] or [Show In-Delay Status] check box. This
will add the [Select State] choice.
Display Color
Select the Switch color.
Pattern
Select the pattern from among 9 types.
Pattern Color
Select the pattern color.
The Switch color appears as a combination of the [Display Color]
and [Pattern Color].
Border Color
Select a border color for the Switch.
Blink
Select the Part blink and blink speed. You can choose different
blink settings for the [Display Color], [Pattern Color], and
[Border Color].
There are cases where you can or cannot set
Blink depending on the Display Unit and [Display] tab's [Display
Settings] area. 8.3.1 Setting Colors
Color
Select the Switch color. The display will show a different
colored image as the selected part image.
Depending on the shape, you may not be able to
set the [Display Color], [Pattern Color], [Border Color], [Color],
and so on.
