Part ID
Parts are automatically assigned an ID number.
Selector List Parts ID: LP_**** (4 digits)
The letter portion is fixed. You can change the number to within
the range of 0000 and 9999.
Comment
The comment for each Part can be up to 20 characters.
Display Count
Set the number of operations to display on the list, from 1 to
16.
When it is 16 or less, display only the added number.
Type of Operation
Turns a specified bit ON/OFF.
10.16.1 Bit Operation
Sets data into a specified Word Address.
10.16.2 Word Operation
Operates Screen Change.
10.16.3 Screen Change
Handles special features, such as changing
the display unit into offline mode and displaying a Window.
10.16.4 Special Operation
Selector Function List
Displays the type of selected Switches. Up to 256 passwords can
be added.
-
In the selector function list, when you select
and right-click the feature and select [Default (D)], the feature
will be registered as a switch to be displayed on the top of the
list. For the feature to display on the top of the list, it is
useful to set the features frequently used as default, because the
procedure to select from the list by touch operation is not
necessary.
Add
Click this button, and select the operation you want to add to
the [Selector Function List].
Delete
Delete the operation selected in the [Selector Function
List].
Copy and Add
Copy the operation selected in the [Selector Function List] and
add it to the last.
↑/↓(Move Upward/Move Downward)
Moves the feature selected in the [Selector Function List] one
position up (or down) the list to change the display order of the
list.
Item Name Setting
Configure settings for Item Name display.
Direct Text/Text Table
Set whether to input directly for item names or to reference
text registered in a Text Table.
Directly input the item name to be
displayed.
Use text from a previously saved Text Table.
If you want to add or select item names to the text table, select
[Add Text] from the text input pull down menu, type the text, and
click [OK] to register/select new item names to the text table.
