GP-Pro Ex Reference Manual - 10.15.1.6 Lamp Feature/Extended

10.15.1.6 Lamp Feature/Extended

Address Type

Designate the address to operate the state from [Bit Address] or [Word Address].

Bit Address (1 to 4) /Word Address

Set up an address. The lamp display will change depending on the bit status of the address designated here and the [State Switch Condition].

Number of States

Set the number of display states. The range will differ depending on the [State Switch Condition] and whether a Bit Address or Word Address is set.

For [Change Condition by Bit]: 3 to 5
For [Change Condition by Bit Combination]: 2 to 16

For [Change Condition by Bit]: 3 to 17
For [Change Condition by Bit Combination]: 2 to 256

State Switch Condition

When the [Number of States] is 3 or more, select the condition that will change the status.

This can be set for either [Bit Address] or [Word Address]. The status is judged by which bits are ON.

This can only be set for [Bit Address]. The status is judged by the combination of bits that are ON from Bit Address 1 to 4.

Available when [Word Address] is selected. The state is defined by the value of the bottom eight bits in the word address.

When [Change Condition by Bit] is selected and multiple bits are ON, the status is judged by the earliest bit set for Bit Address and by the most recent bit for Word Address.

State List

The lamp does not display normally if the bit states are outside the defined [Select State] options. For example, if the [Number of States] is 3, you can use states 0, 1, and 2. Turning on bits 1 and 2 creates invalid state 3, and the lamp continues to display its previous valid state. While in invalid state 3, and you change screens from a different screen to this screen, the lamp itself will not be visible.

Bit Address

	[Select State] option	Change Condition by Bit	Change Condition by Bit Combination
When [Number of States] is 1	Normal	—	—
When [Number of States] is 2	OFF	—	—
When [Number of States] is 2	ON	—	—
When [Number of States] is 3 or more	State 0	All OFF	All OFF
	State 1	Bit 1 is ON	Bit 1 is ON
	State 2	Bit 2 is ON	Bit 2 is ON
	State 3	Bit 3 is ON	Bit 1 and 2 are ON
	State 4	Bit 4 is ON	Bit 3 is ON
	State 5	—	Bit 1 and 3 are ON
	State 6	—	Bit 2 and 3 are ON
	State 7	—	Bit 1, 2 and 3 are ON
	State 8	—	Bit 4 is ON
	State 9	—	Bit 1 and 4 are ON
	State 10	—	Bit 2 and 4 are ON
	State 11	—	Bit 1, 2 and 4 are ON
	State 12	—	Bit 3 and 4 are ON
	State 13	—	Bit 1, 3 and 4 are ON
	State 14	—	Bit 2, 3 and 4 are ON
	State 15	—	All ON
	State 16	—	—
	State 17	—	—
	· · ·	—	—
	State 255	—	—
Interlock	Interlocked	—
Delay	In Delay	—

Word Address

	[Select State] option	Change Condition by Bit	Change Condition by Data
When [Number of States] is 1	Normal	—	—
When [Number of States] is 2	OFF	—	—
When [Number of States] is 2	ON	—	—
When [Number of States] is 3 or more	State 0	All OFF	Data 0
	State 1	00 Bit is ON	Data 1
	State 2	01 Bit is ON	Data 2
	State 3	02 Bit is ON	Data 3
	State 4	03 Bit is ON	Data 4
	State 5	04 Bit is ON	Data 5
	State 6	05 Bit is ON	Data 6
	State 7	06 Bit is ON	Data 7
	State 8	07 Bit is ON	Data 8
	State 9	08 Bit is ON	Data 9
	State 10	09 Bit is ON	Data 10
	State 11	10 Bit is ON	Data 11
	State 12	11 Bit is ON	Data 12
	State 13	12 Bit is ON	Data 13
	State 14	13 Bit is ON	Data 14
	State 15	14 Bit is ON	Data 15
	State 16	15 Bit is ON	Data 16
	State 17	—	Data 17
	· · ·	—	· · ·
	State 255	—	Data 255
Interlock	Interlocked
Delay	In Delay