Lamp Feature
Set whether or not to use the lamp feature.
When combined with the Switch feature, you can create a Switch
that changes color and label depending on the designated bit
state.
Bit Address
Designate the Bit Address to operate the state (light ON/light
OFF).
Copy from Switch
The [Switch Feature] tab's [Bit Address] setting is copied to
the [Lamp Feature] tab's [Bit Address].
This is used when setting a Lamp Feature and Switch Feature to
the same address.
Copy to Switch
The [Lamp Feature] tab's [Bit Address] setting is copied to the
[Switch Feature] tab's [Bit Address]. This is used when setting a
Lamp Feature and Switch Feature to the same address.
