On the [Switch Common] tab, select the [Delay
Feature] check box, and select [Double Touch] for the [Delay
Action]. Set 5 seconds for the [Standby Time].
Click [Extended] and select the [Show In-Delay
Status] check box.
On the [Color] tab, set [Select State] to [In
Delay]. In [Display Color], set the color while in waiting for
input and set [Blink] to [Medium].
Depending on the shape, you may not be able to
change the color.
As needed, set the label that will display while in
delay on the [Label] tab, and click [OK].
When you select a switch and press the [F2]
key, you can directly edit the text on the label. When [Text Table]
is selected, you can change the current Text Table.
to place a switch on
the screen.
