If you connect the bit address for sound output
to the bit address for an alarm occurrence, you can provide an
announcement of error occurrences with sound.
Next, specify the sound to play. Select the [Sound
Number] cell, click , and select [Create
Sound Data].
The [Create/Edit Sound Data] dialog box opens.
Specify the [Sound Number] and [Comment]. (For example, [Sound
Number] 1, [Comment] test)
Click the [Browse] button to open the [Open] dialog
box. Select the location and file name of the file you want to
convert and click [Open].
Select [Save in]. The converted file will be stored
in the area specified in [Save in] when transferred to the display
unit.
If you select [Save In] - [CF Card] without
specifying the CF Card Folder, a message to create the [CF Card
Folder] appears. Click [Yes]. When the [Project Information] dialog
box appears, select the [Enable CF Card] check box and specify the
folder.
Click the [OK] button and the conversion will
start.
If needed, select [Playback Method] and [Stop]
functions for the converted sound.
(For example, [Playback Method] Repeat, [Stop] Enable)
.
, and select [Create
Sound Data].
