33.6.5 External PLC Simulator Settings Guide
[External PLC Simulator Connection] dialog box displays when the
following operating environment is set up.
For details about the operating environment, please see the
following.
33.5.1 Operating
Environment
Connects with an external PLC simulator.
Sets a connection between GP=Pro EX and the external PLC
simulator.
Select to check display unit operations with the PLC.
Please select the equipment that will be
connecting to the external PLC simulator.
Select the name of the driver for
simulation.
Select the driver name as set up in the [System Settings] window,
[Device/PLC] tab's [Series] field.
Select the device name associated with the
driver selected in the [Device/PLC] setting.
Select the device name as set up in the [System Settings] window,
[Device/PLC] page's individual driver tabs.
Select Connection Type
You can set up when the [Connects with an external PLC
simulator] check box is selected.
The supported CPUs are different depending on the device/PLC
manufacturer you are using.
For more details, please refer to the following.
33.5.2 Supported
Drivers/CPUs
Type
Select the CPU type for the external PLC
simulator.
|
CPU
Select the CPU model for the external PLC
simulator.
|
|