In the destination folder you selected in [Select Folder],
create backup data (*.cml) for the project currently open in GP-Pro
EX (or the project selected in [Select project]) and the memory
loader to start the data on the display unit. Please select the CF
card or USB storage root folder as the destination.
This selection is not available if you selected
IPC series as the unit type.
If the [CF Card Folder] or [USB Storage Folder]
is already set up, the folder path is displayed. Move or copy all
generated data to the CF Card or USB storage root folder.
Confirm Backup Data
[System Information], [Project Information], [Backup Size], and
the names and dates of each backup file.
About Backup File Name
The backup file default name depends on the
display model.
GP models with control functionality (for
example models with "-D81", "-FN1M", or "-CA1M" in their names) are
not listed. Use the above list with the GP model name minus the
control portion.
For example, AGP-3500T-D81 → AGP-3500T
Create Project File
You can create a project file (*.prx) from backup data
(*.cml).
Create Boot Data
In the destination folder you selected in [Select Folder],
create the memory loader tool necessary for upload from the display
unit to the CF Card/USB storage device and for download from the CF
Card/USB storage to the display unit. Please select the CF card or
USB storage root folder as the destination.
This selection is not available if you selected
IPC series as the unit type.
If the [CF Card Folder] or [USB Storage Folder]
is already set up, the folder path is displayed. Move or copy all
generated data to the CF Card or USB storage root folder.
