Only one project file (*.prx) can be saved on
the display unit.
When sending a project, the necessary system
programs, protocol programs, and fonts are downloaded to the
display unit. The transfer will take a few moments.
If the file is already in the CF card, the file
is overwritten when transferred. If you do not wish to overwrite
the file, clear the [Transfer CF Card data] check box in [Transfer
Settings] for the transfer tool.
If [USB Storage Folder] is set up in the
project, data is not transferred to USB storage attached to the
display unit. Copy or move the data from the USB storage folder to
USB storage.