22.8 Trigger Condition Setup
A created script can use any of the following 11 types of
trigger conditions.
Executes each display scan time.
Each time the designated time elapses, the
script is executed one time. The timer duration can be set from 1
to 32767 seconds.
-
When setting the timer function's time, the
time value includes the set time + display scan time error. Also,
depending on the time taken to draw a screen item or to print out
data, the timer function may be slowed.
-
When using D-Script, switching the screen
causes the timer function to restart counting from 0.
When the display unit detects the designated
bit address (trigger bit) rise from 0 to 1, the script is
triggered.
While the designated bit address (trigger
bit) is ON, the script is executed at every display scan time.
When the GP detects the designated bit
address (trigger bit) fall from 1 to 0, the script is
triggered.
While the designated bit address (trigger
bit) is OFF, the script is executed at every display scan time.
When the GP detects the designated bit
address (trigger bit) rise from 0 to 1 or fall from 1 to 0, the
script is triggered.
When the defined condition is met, the script
runs one time.
When the Trigger Condition is 100 > [D100] > 50,*3 the script will
execute with the following timing.
[False] → [True] is detected, the script executes and 70 is
assigned to D100.
The script does not run when [True] → [True] is detected.
While the condition is true, the script is
executed at every display scan time.
When the Trigger Condition is 100 > [D100] > 50,*3 the script will
execute with the following timing.
When the defined condition is false, the
script runs one time.
When the Trigger Condition is 100 > [D100] > 50,*3 the script will
execute with the following timing.
[True] to [False] is detected. The script executes and 40 is
assigned to D100.
The script does not run when [False] to [False] is detected.
While the condition is false, the script is
executed at every display scan time.
When the Trigger Condition is 100 > [D100] > 50,*3 the script will
execute with the following timing.
|
