// Append strings "Product Name:" and "Price".
_strset(databuf0, "") // Initialize data buffer 0.
_strset(databuf0, "Product Name:") // Store text to data buffer
0.
_bin2decasc(databuf1, [w:[#MEMLINK]0500]) // Convert value to text
and store in data buffer 1.
_strcat(databuf0, databuf1) // Append data buffer 1 to end of data
buffer 0.
_strset(databuf1, "") // Initilalize data buffer 1.
_strset(databuf1, "Price") // Store text to data buffer 1.
_strcat(databuf0, databuf1) // Append data buffer 1 to end of data
buffer 0.
// Initilialize temporary address.
[t:0001]=0
[t:0002]=0
// Text strings stored in internal device in consecutive word
units. Store again in byte units (30 characters).
loop()
{
[w:[#MEMLINK]2000]#[t:0002]=[w:[#MEMLINK]1000]#[t:0001]>>8
// Move top byte to bottom byte and store.
[w:[#MEMLINK]2001]#[t:0002]=[w:[#MEMLINK]1000]#[t:0001]&0xFF //
Delete top byte and store in next address.
[t:0001]=[t:0001]+1 // Address offset + 1.
[t:0002]=[t:0002]+2 // Address offset +2.
if([t:0001]==15) // Store 2 bytes in 2 words. Repeat 15
times.
{
break
}
endif
}
endloop
_ldcopy(databuf2, [w:[#MEMLINK]2000], 30) // Store internal device
2000 to 2029 to data buffer as text string.
// Add text "Product Name:"
_strset(databuf1, "") // Initialize data buffer 1.
_strset(databuf1, "Product Name:") // Store text in data buffer
1.
_strcat(databuf1, databuf2) // Append data buffer 2 to end of data
buffer 1.
// Add price to product name.
_strcat(databuf1, databuf0) // Append value in data buffer 0 to
data buffer 1.
Function Summary
Append the text "Price:" and "Yen" to the price
data in internal device 0500.
Change the data format in order to send print data
to the printer. Divide into byte units the string data (Produce
Name) stored sequentially in internal memory address 1000, and
store as string data into the bottom bytes of internal device
addresses 2000 to 2030.
Use the function _ldcopy to copy the bottom byte of consecutive
word addresses to databuf2.
The _ldcopy function takes data stored as
Words, and stores only the bottom bytes in the buffer, while the
data in the top bytes is ignored.
Add the strings "Product Name:" and "Price" to
databuf2.