Turns OFF the screen display of a display unit from a
device/PLC.
Click the [System Settings] tab.
If the [System Settings] tab is not displayed
in the workspace, on the [View (V)] menu, point to [Workspace (W)],
and then click [System Settings (S)].
Click [Display Unit].
Select the [System Area] tab. In the [System Data
Area], set [System Area Start Address] and select the [Enable
System Data Area] check box.
Select the [Screen Display ON/OFF: (1 Word)] check box.
Write "FFFFh" to the address displayed in [Screen
Display ON/OFF: (1 Word)]. The display unit screen turns OFF.
To display the screen again, touch the screen
once.
