Print Mode
Select the print timing.
Printing is performed every time sampling
occurs.
Data is printed in block units. This can only
be set when in the [Mode] tab's Extended area the [Overwrite old
data after finishing the specified cycles] check box is
cleared.
Printing is started via the [Print Control Word Address].
Print Control Word Address
When the [Print Mode] is set to [Batch], select an address to
control the printing. When 0 bit of the designated address turns ON
the printing starts.
Two sequential Words are used to store the Word Address: the
control Word and the block number. Select the block number and
start the printing.
Print Completion Bit Address
When the [Print Mode] is set to [Batch], select an address to
confirm the completion of the printing.
Designates the Bit Address to be turned ON when data is printed
out for each block. After confirming that this Bit Address is
turned ON, perform the next printing.
Copy from Display/ CSV Format
When the format is set on the [Display/Save in CSV] tab, copy
the settings from the [Display/Save in CSV] tab. Use this feature
when you want to print data using the Display/Save in CSV
format.
Data Display Columns
Displays the number of data columns.
Row/Column
You can set the following items when in the [Mode] tab's
Extended area the [Overwrite old data after finishing the specified
cycles] check box is cleared.
Add an item-name line to the top
Designate whether or not to add text rows on top of the Data
row. The sampling addresses are displayed in the editing area as
the Data column item names. Cells that have an address displayed
cannot be edited.
Data Display Rows
Set the number of data rows to print from 1 to the [Occurrences]
set on the [Mode] tab.
Calculation Results
The number of calculation rows can be from 0 to 4. In the
Calculation rows, values calculated (Total, Average, Max, Min) from
data in the defined [Occurrences] can be displayed.
Data Display Columns
Displays the number of data columns.
Left Margin
Sets the left margin when printing data, from 0 to 80
single-byte characters. It does not affect headers and footers.
Header/Footer
Opens the [Edit Header]/[Edit Footer] dialog box. Input text you
wish to print as a header/footer. The number of characters that can
be entered is 160 char./line x 40 lines.
Preview
Opens a preview screen to confirm the print image.
Details
Opens up a dialog box to configure detail settings for the
column or Calculation row selected in the Preview area.
25.8.7.1 Print (Custom
Settings) / Date Set
25.8.7.2 Print (Custom
Settings) / Time Set
25.8.7.3 Print
(Custom Settings)/Data Settings - Data Type
25.8.7.4 Print
(Custom Settings)/Data Settings - Style
25.8.7.5 Print (Custom
Settings) / Text Settings
25.8.7.6 Print
(Custom Settings)/Calculation Settings - Data Type
25.8.7.7 Print
(Custom Settings)/Calculation Settings - Style
Add this Column
Insert a column in front of the column selected in the Preview
area. Choose from a [Date], [Time], [Data], or [Text] column. You
can directly input the desired text in each cell of an inserted
[Text] column.
When adding a [Data] column, the [Select Print Data] dialog box
appears where you can select a data column (address) to add.
To add multiple addresses, drag the mouse to select consecutive
columns. If you click columns to add while pressing the [Ctrl] key,
you can select separate addresses.
Move Right/Move Left
Move the column you selected in the preview area to the
right/left.
Ruled Line
Set the ruled line to print. Select from [Right Border], [Left
Border], [Right+Left Border], or [Vertical Borders].
Add this Row
Insert a [Text] row in front of the row selected in the Preview
area.
You can directly input the desired text in each cell of an
inserted [Text] row.
Move Up/ Down
Move the [Text] row selected in the Preview area
upward/downward.
Ruled Line
Set the ruled line to print. Select from [Top Border], [Bottom
Border], [Top+Bottom], [Horizontal Borders].
Preview area
Displays the set contents with the selected format.
If [Overwrite old data after finishing the specified cycles] is
selected on the [Mode] tab's Extended settings, only one data row
will display. If the [Overwrite old data after finishing the
specified cycles] check box is cleared, the data rows equal the
designated [Occurrences].
When [Overwrite old data after finishing the specified cycles]
check box is selected
When [Overwrite old data after finishing the specified cycles]
check box is cleared