When you change between [Random] to
[Sequential], all address fields and the [Display/Save in CSV] and
[Print] settings are initialized.
If [Random] is selected, it will take longer to
communicate with the device than when [Sequential] is selected.
To delete a row from the address list,
right-click the row and select [Delete]. Or press the [DELETE] key.
In the [Delete Confirmation] dialog box, click [Yes (Y)] to remove
the settings. The deleted row becomes blank. The rows below the
deleted row do not shift up.
If you run Address Block
Conversion or other features that cause addresses to exceed
the device range, they are replaced with the maximum device
address.
