For details on how to draw parts, and defining
the address, shape, color, and labels, please see the parts editing
topic. 8.7.1 Editing Parts
Configure settings to display Sampling Group "1" on the screen
of the display unit.
In the [Common Settings (R)] menu, select [Sampling
(D)] or click , and a list of
registered sampling groups appear. Double-click the row for [Group]
1 and the sampling group 1 setup screen appears.
(For information about Address/Action see 25.3.1 Procedure - Sampling Data
at Constant Intervals.)
Open the [Display/Save in CSV] tab. Select the
[Display/Save in CSV] check box.
Select the display format for the date and
time.
Click [Data Type] to open the [Data Settings]
dialog box. Set the data type, input range, number of display
digits, and so on. The settings are applied to all the data
columns.
Click [OK] to close the dialog box.
Specify a display color (text color)/background
color. The display format settings are complete.
Open the editing screen, and on the [Parts (P)]
menu select [Sampling Data Display (S)], or click , to place the Part on
the screen.
Double-click the placed Sampling Data Display.
The [Sampling Data Display] dialog box appears.
Define the sampling group you want to display on
the screen. Set Sampling Group No. to "1".
In the [Common Settings (R)] workspace's
[Sampling] node, click the [Mode] tab. In the [Extended] settings,
after you clear the [Overwrite old data after finishing the
specified cycles] check box, use [Block Number Specification
Address] to display the sampling group.
Set the [Display Rows] and [Display Columns].
When you wish to edit the sampling data on the
screen, select the [Edit Data] check box, and set up a keypad for
editing the data. The screen will change to the editing screen by
touching the data, and the data can be edited using the keypad.
Select whether or not to show Ruled Line/Border and
select the [Clear Color].
Select the [Display] tab, and set the font type and
size.
Select the [Switch] tab, and select the necessary
scroll switches.
With [Select Shape], select the switch shapes, set the label and
text color as needed, and click [OK].
The Sampling Data Display is now set. You can move the switches
independently to the desired location.
For the attached [Sampling Data Display]
switches, you cannot set the shape or color independently. to set a
different shape or color for each switch, use the the Switch Lamp's
[Special Switch], set up with the [Sampling Data Display Switch]
action.
, and a list of
registered sampling groups appear. Double-click the row for [Group]
1 and the sampling group 1 setup screen appears.
, to place the Part on
the screen.
