Enable Web Server
Defines whether or not GP data is made available using a Web
page.
Destination
Select either [CF Card] or [USB Storage] as the destination of
the standard HTML template.
Folder
Defines the folder path, up to 90 single-byte-characters long,
to use as the Web Server on the CF card or USB storage.
If you define the folder as "WebSite", and enter the address
"http://ip_address/default.html" in Internet Explorer, it loads the
Web page "WebSite\default.html" from the CF card or USB
storage.
For example, referencing the "Website" folder on the CF card
-
As you can specify only a single folder as the
Web Server's root folder, set up the destination to either USB
storage or the CF card.
-
Slashes ("/" or "\") at the end of paths are
automatically deleted when saving. Except in the case when the
slash ("/" or "\") is the only character in the path.
Default page when there is no file name
Defines the default file to display when no file name is defined
in the http path. The maximum file name length is 90 single-byte
characters.
For example, when this property is set to "default.html", when
you type "http://ip_address" into Internet Explorer's address bar,
you are actually accessing "http://ip_address/default.html".
HTTP Port Number
Set the Web-Server port number: 1 to 65535.
-
For most applications, use port number 80.
However, if 80 is not available because of the firewall or other
issues, you may need to change the port number.
-
As the number of available ports is limited by
the firewall, please confirm with your firewall settings.
