Device/PLC
Name
Select devices/PLCs connected to the display unit.
Device
Address
Sets up the start address of device addresses to monitor. You
cannot specify Symbols.
Access
points
Select the number of address points to display and access in one
screen: [1], [2], [4], [8], [16], [32], [50], [100], or [200].
Data Type
Define the bit length and data type of addresses:
[Bit], [16 Bit Signed], [16 Bit Unsigned], [16 Bit HEX], [32 Bit
Signed], [32 Bit Unsigned], [32 Bit HEX], [Single-precision
Floating Point], [Double-precision Floating Point], or [Text].
Update cycle
Select the monitoring frequency: [1], [2], [3], [4], [5], [10],
[20], [60], [120], [180], or [300] seconds.
Start
Monitoring
Starts monitoring device addresses at the defined frequency.
Monitoring ends if you change the page or exit the browser.
Device Display
Frame
Displays device addresses starting from the [Device Address]
field, up to the number of addresses defined in the [Access Point]
field.
