-
The Web Server cannot be used without first being
set up. In the System Settings workspace, [Display Unit] page,
[Remote Viewer] tab, select the [Enable Web Server] check box.
Please check this setting before transferring the project.
-
Set up no more than 90 single-byte characters for
the destination path of the standard HTML template and FTP
server.
To use the Web Server's standard HTML template, be sure to transfer
the standard HTML template to the display unit. The Standard HTML
template is installed in the following location.
C:\Program Files\Pro-face\GP-Pro EX *.**\HTMLContent (*.**
indicates the version)
See the following for transfer methods.
34.11.1.2 Site
Transfer Settings
-
You cannot transfer the standard HTML template
when the display unit has not been initialized. In any project,
select the [Enable Web Server] check box and transfer it to the GP.
Next, use the Transfer Tool's [Send Web site] command to transfer
the standard HTML template.
-
The system program on the display unit (Runtime)
must be GP-Pro EX Ver. 2.10 or later, or you cannot transfer the
standard HTML template to the display unit.
-
The number of computers that can access the Web
Server at the same time depends on the display unit model. With the
GP-3400, 3500, 3600, and 3700 Series, three computers can access at
the same time. With GP-3200 and 3300 Series, only one computer can
access the Web Server.
-
[Device
Information]. Associated content in the main frame cannot be
customized by users.
-
[Alarm
Information]. Each page can display a maximum of 15
alarms.
-
The maximum number of alarms you can display on
RSS is 15.
-
When Internet Explorer display settings are
changed, such as the text size, the standard HTML may not display
properly.
-
When using the Web Server on GP-3200 and 3300
Series units, 1 MB from the Screen Area is allocated to the Web
Server. As a result, the Web Server adds 1 MB to the send data
size.
-
When using a RSS reader and the alarm records are
either Active or History, recovery and acknowledge operations do
not send update notifications to RSS reader. If you want to receive
notification of recovery and acknowledge operations, use Log alarm
records. However, note that the RSS reader has no way to
distinguish between trigger, recovery, and acknowledged alarms.
-
If a large number of browsers connect to the Web
Server, too much load can be put on the Web Server, which could
cause the Web Server to stop responding or break connections.
-
When accessing the FTP server, the Internet
Explorer folder display may not always update. If that happens,
from the [View (V)] menu, select [Refresh (R)] or press the F5
function key.
-
If you copy a folder with multiple subfolders on
the FTP server, the login screen displays once for every file.
Click [Cancel] to close the login screens.
-
If you use the FTP server to overwrite read-only
files, the [Login] dialog box displays. Click [Cancel] to close the
dialog box.
-
Connecting to the FTP server prevents screen and
Web site transfers. Please logout before running screen or Web site
transfer.
-
Only direct device specification can be set in
the Device View of the Web Server. Symbols, control variables,
etc., cannot be used.
-
When displaying a Web page on Windows XP Service
Pack 2 or later, because the default setting blocks popup windows,
make sure you allow popups so you can view the Web page and enter
values on the Web Server.
The following describes the steps to allow popups.
