37.19.1 Procedure - Limiting Camera-Viewer EX Users (Security)
with Levels
Registers passwords for security levels 1 to 15 and defines the
security level for each display screen. In the following example,
an operator with Level 15 security can use Camera-Viewer EX.
In GP-Pro EX, from the [Common Settings] menu point
to [Security] and select [Security Password], or click .
The [Set password] screen opens. Select the [Enable
Security Function] check box, and type the password "5555" in
[Level 15].
Each password should be 8 single-byte
characters or less.
Select the [Set Security Level For Each Feature]
check box, then set the [Read Camera Viewer] level to 15.
After setting up security levels, transfer the
project to the display unit.
For information about Camera-Viewer EX security
operations, please refer to the Camera-Viewer EX Operation Manual,
Procedure - Limiting Camera-Viewer EX Users (Security).