ID Number
An ID number related to the [Filing] Display and a Switch Lamp
[Special Switch] [File Item Switch]. The value can be between 0 and
255.
When placing two or more [Filing] Displays on one screen, ensure
that this number is unique.
File Number
Designate the filing data number to display in the [Filing]
Display from 0 to 2047.
Via Internal Device
Set to transfer via the internal device when transferring filing
data. By temporarily storing filing data in the internal device,
you can use a Data Display to view and edit data on the screen.
26.17.4 Manual
Transfer Via Internal Device
Storage Start Address
When [Via Internal Device] is set, select a start address for
data stored there.
Transfer Complete Flag
Set to confirm that transfer backup SRAM to device/PLC is
complete with a designated bit.
Inter-PLC Transfer Complete Bit Address
Set the bit address to confirm that transfer is complete.
Direct Selection
To select data to transfer, touch displayed item names. Or, use
the up/down cursor switches to select item names.
Remember Cursor Position
Set to save the current cursor position when a screen change
occurs.
