26.13.2 Transfer - Transferring Recipes (Filing Data) Using
Touch (Manual Transfer)
The following shows the process for manual transfer from backup
SRAM to Device/PLC. (When multiple folders are not used.)
Turn ON D10 bit 0. All the filing data recipes
stored in internal memory are transferred to backup SRAM.
When saving the recipes to the CF Card, turn ON
bits 0 and 8. When saving the recipes to the USB storage device,
turn ON bits 0 and 9.
When the transfer to backup SRAM has been completed
successfully, turn ON the Write Completed Bit (M100). After
confirming the bit is ON, turn OFF D10 bit 0 and M100.
In the Special Data Display [Filing] on the screen
of the display unit, the item names of registered blocks in the
files specified in the backup SRAM (File#0) display in a list.
Touch the recipe you want to transfer. (You can select multiple
files from the displayed list.)
Touch the backup SRAM to Device/PLC transfer
switch.
The selected recipes transfer to the device/PLC.
