This section describes the menu items that are displayed in the
second menu of the system menu.
Volume
Adjust the volume of the external speaker connected to the AUX
terminal. This switch is displayed only when the model supports
sound output (AUX output).
IP Address
Touch this switch to check the IP address designated for the
display unit. This switch is displayed only when the model supports
Ethernet.
RGB
Screen
This switch is displayed only when the VM unit is used. Touching
this switch displays the menu to move to the [Position], [Screen], [Color], and [Default] setting screens.
Position
Adjust the horizontal and vertical positions of the screen.
Available ranges are between -128 and 128 for the horizontal
position, and between -16 and 16 for the vertical position.
Screen
Adjust the clock and phase. Available ranges are between -128
and 128 for the clock and between 0 and 63 for the phase.
Color
Set the level for red, green, and blue or perform fine tuning.
The levels can be set within the range of 0 to 3, and fine tuning
is available within the range of 0 to 255.
Default
[EXECUTE]: Touch the
button to reset the [Position], [Screen], and [Color] settings to their initial
values.
