Set the communication settings of the connection equipment used
for a script.
Port
Displays the port used for a script.
SIO Type
Select the communication system which communicates with
connection equipment from [RS232C], [RS422/485 (2-wire)], and
[RS422/485
(4-wire)].
Speed (bps)
Select the communication speed from [2400], [4800], [9600],
[19200], [38400], [57600], and [115200].
Data Length
Select the length (bit) of the communication data from [7 bit]
and [8 bit].
Parity
Select the parity check. Select [None], [Even], or [Odd].
Stop Bit
Select the length (bit) of a stop bit from 1 and 2.
Flow Control
Select the communication control system which monitors and
prevents overflow of transmission data. Select [None], [ER (DTR/CTS) control], or
[RTS/CTS control].
5V Power
Supply
If the communication method is [RS232C], designate whether or
not to set the 5V power supply. Only set [Enable] if the connected device
requires a power supply. If a 5V power supply is not needed and you
set this to [Enable],
you can damage the connected device or display unit. Confirm the
specifications of the connected device and cable when setting
this.
