Disable
Does not set a Global Window.
Direct
Displays the Window Screen number to display and its position in
a fixed state.
Control the display by operating the address (LS16) in the
display unit's internal device or the device/PLC to which the
system data area is assigned.
Setting Screen
Internal Device Addresses to Use
Controls the display of a Global Window. If
you turn ON Bit 0, a Window is displayed.
Window Screen
No.
Set the Global Window's screen number from 1 to 2,000.
Display Position
X-Coordinate/Y-Coordinate
Set the Global Window's display position. Even if the screen
changes, the Window is displayed in the same position. The
coordinate specified here is the top left corner of the Window.
Indirect
Set the Window Screen number to display and its position by
storing data in the display unit's internal device addresses (LS16
to LS19). If you assign a system data area to the device/PLC, you
can switch Window Screens or change the display position from the
device/PLC.
Setting Screen
Internal Device Addresses to Use
Controls the display of a Global Window. If
you turn ON Bit 0, a Window is displayed.
Specify the number of the Window Screen you
want to display from 1 to 2,000.
Set the Global Window's display position. If
you change the value to store in the address, you can move the
Window. The coordinate specified here is the top left corner of the
Window.
-
To use a system data area on the device/PLC,
set this using four sequential words of the assigned address.
M.16.2.6 Main Unit -
System Area Settings
-
The following positions are the starting
coordinate point when a display unit's orientation is set to
[Portrait].
-
Display units except GP-4100 Series:
Bottom-left of the screen (0,0)
-
GP-4100 Series: Top-right of the screen
(0,0)
-
For more details, please refer to the
following.
3.8.1 Restrictions
for Screen Display
Data Format
Select the type of data to store in the address, either
[Bin] or [BCD].
Enable Bulletin
Messages
This option is displayed when Bulletin Message is enabled. The
settings cannot be changed from here.
