Logic Program
[On] enables set up
for all the following items. [Off] prevents set up.
Fixed Scan
Time
Specify the logic function execution time. Setting range: 10 to
2000 ms
CPU Scan
Percentage
Set the ratio of the execution time of the logic function to a
value within the range of 10% to 50%.
WDT(100-3000)
Set the watch dog timer to a value between 100 and 3,000 ms.
Run at
Start Up
When turning ON the display unit, select whether to
[RUN] or [STOP] the logic operation.
Data
Update Rate
Select the speed for updating
device addresses of connected devices and internal devices assigned
to the logic program, [Fastest], [Normal], or [Slowest].
Minor
Errors
When a minor error arises, select whether to [RUN] or [STOP] the logic operation.
I/O
Settings
Select [On] to use
I/O operation. Select [Stop] to turn off the I/O
operation.