Go to offline mode and touch [Main Unit Settings] on the item
changeover switch.
[Main Unit
Settings] screen opens. Touch [Operation Settings].
[Operation
Settings] window opens. In the [Touch Panel Detection] field,
select either [ON] or
[OFF].
ON
Touch is detected when the screen is
touched.
OFF
Touch is detected when your finger leaves the
screen.
In momentary operation, touch is detected when
the screen is touched regardless of the Touch Panel Detection
setting. In repeat operation, the Touch Panel Detection setting
becomes invalid.
[Exit]
displays the [Exit]
dialog box. Touch [Save
changes and exit].
When using GP-4100 series, touch [Top] to return to the initial
screen. Touch [Exit]
and in the confirmation screen, touch [Save changes and exit].
[Save
File] dialog box appears and then the display unit restarts.
The setting is complete.
