M.2.3
Turning OFF the screen after a certain period of time (standby
mode)
To extend the life of the backlight, the display unit
is equipped with a screen saver function that automatically turns
the backlight OFF when no operations have occurred for a designated
period of time. to set up standby mode, open the [Screen Settings]
screen as follows.
Go to offline mode and touch [Main Unit Settings] on the item
changeover switch.
[Main Unit
Settings] screen opens. Touch [Screen Settings].
[Screen
Settings] screen opens. Set [Standby Mode Settings] to
[Screen OFF].
If you want to erase the screen after the defined period of time
elapses (for example, 10 minutes), adjust the settings as
follows:
[Standby Mode
Settings] field. Using the tenkey pad, type "10" and touch
the [ENT] key.
[Exit]
displays the [Exit]
dialog box. Touch [Save
changes and exit].
When using GP-4100 series, touch [Top] to return to the initial
screen. Touch [Exit]
and in the confirmation screen, touch [Save changes and exit].
[Save
File] dialog box appears and then the display unit restarts.
The setting is complete.
