M.1.3
Operation in offline mode
This section describes operations necessary for various
settings.
Selecting a menu
Touch the menu item.
Entering numbers
After selecting a menu or touching an input field, you can enter
numeric values.
Use the screen's numeric touch
keypad to enter values.
Selecting setup conditions
After selecting a menu item and entering that area, touch the
option you would like to setup.
After completing all settings (other than
GP-4100 series)
Touch [Save] at the
bottom of the screen.
If you wish to cancel the settings, touch [Cancel].
-
Touch
[Save] to write the
setup conditions to internal memory.
-
Touching [Save] begins writing to internal
memory, which may take some time until you return to the previous
menu. Do not touch the screen until it returns to the menu
screen.
-
Do not turn
off the display unit while changes to the setup are being saved. It
may damage the internal memory content.
-
Touch [Cancel] to return changes to an
item's setup to the state when it was last saved.
After completing all settings (GP-4100
series)
Touch [Top] to
return to the initial screen.
Touch [Exit].
When exiting offline mode and to save the settings, touch
[Save changes and
exit]. When exiting offline mode and to cancel changes to
settings, touch [Lose changes and exit].
-
Touch [Save changes and exit] to write
the setup conditions to internal memory.
-
Do not turn off the display unit while
changes to an item's setup is being saved. It may damage the
internal memory content.
Return to the previous level
Touch [Back].
|
