Input
Configure the module's analog input terminal settings.
Data Format
Select the data format from [Disable], [Voltage (0-10V)] or
[Current (4-20mA)] for analog input.
Fixed
The analog values in the voltage and current input settings
appear in the range of 0 to 4095 as shown below.
User Defined (Maximum/Minimum)
The analog values in the voltage and current input settings
appear within the range of [Maximum] and [Minimum] settings.
The available values are as follows.
Maximum: minimum to 32767
Minimum: -32768 to maximum
Output
Configures settings for module analog output terminals.
Data Format
Select the data format from [Disable], [Voltage (0-10V)] or
[Current (4-20mA)] for analog output.
Fixed
The analog values in the voltage and current output settings
appear in the range of 0 to 4095 as shown below.
User Defined (Maximum/Minimum)
The analog values in the voltage and current output settings
appear within the range of [Maximum] and [Minimum] settings.
The available values are as follows.
Maximum: minimum to 32767
Minimum: -32768 to maximum
Retentive Output
Select whether or not you want to retain output values when the
logic is stopped. Select [Enable] to retain output values even if
the logic stops.
